We offer a careful selection of original and quality spare parts indispensable for the maintenance of dental equipment.
All available products are shipped within 24 working hours!
MINIMUM ORDER AMOUNT € 50 net of VAT.
Citric acid based granule cleaner for AQUADIST Euronda distiller. To be used for cleaning cycle, for the removal of calcifications that accumulate in the heating element.
Vessel for cleaning the suction system, specifically designed to create the turbulence necessary to optimize the cleaning of the suction pipes. Once the disinfectant solution is prepared, the suction terminals are positioned on the plungers, aspiration takes place without assistance. The solution remaining on the bottom of the container will serve to disinfect the spittoon.
Detergent and disinfectant concentrate for daily maintenance of dental aspiration, with anti-limescale action. 1 liter bottle with practical built-in graduated dispenser. 20ml of concentrated liquid are needed to prepare 2.5 liters of solution in the "Pulse Cleaner" bucket.
Original cord for EMS handpieces. It is wired on both sides, one connector goes to the machine body, the other to the scaler handpiece.
Pack of 10 rolls of original Euronda adhesive labels for the E8, E9 and E10 series autoclave label printer, equipped with the integrated label printer (Print Set 2).
Door seal for MELAG autoclaves models 40B, 41B, 43B and 44B.
***** BUY IN PRE ORDER, you will receive the FRIST AVAILABLE DEVICES! If you buy 2, 3 or more pieces the price will be AUTOMATICALLY DISCOUNTED in your CART! ***** Viroxid® Habitat 3 is based on existing air disinfection methods that are already used to purify the air in hospital operating rooms. Three successful methods have been combined into a single device suitable for smaller areas of size up to 100 m3. These three methods consist of: air ionization, filtering and disinfection by UV-C rays.
Fitting to connect the larger diameter tube (17mm) for surgical suction to the suction terminal. The part with pump holder is connected to the suction pipe, the upper part is compatible with both Durr and Cattani terminals. The fitting is partly made of metal and blue in color to allow magnetic detection by the cannula holder when they are stored.
Fitting to connect the smaller diameter (11mm) saliva ejector tube to the suction terminal. The part with pump holder is connected to the suction pipe, the upper part is compatible with both Durr and Cattani terminals. The fitting is partly made of metal and blue in color to allow magnetic detection by the cannula holder when they are stored.
Kit consisting of upper bowl drain ring nut, sealing OR and lower locking ring nut, for the glass bowl of the Planmeca dental unit (in total 3pcs)